We have created a ceiling mount split system evaporator. Cellar contractors have asked for a design that does not take away from the racking capacity and is virtually invisible in the cellar.
| Model | CM2500-S | CM3500-S | CM5000-S |
| Cellar Size | 500 | 1000 | 2000 |
| BTUh (w/85°F air entering the condenser coil) Sensible / Total | 2084 / 2514 | 4945 / 5351 | 5157 / 5544 |
| CFM | 107 | 321 | 321 |
| Dimensions | Evaporator: 35.75”L x 14.5”W x 12.75”H Condenser: 31.18″L x 10.75″W x 21.18″H | Evaporator: 35.75”L x 14.5”W x 12.75”H Condenser: 31.18″L x 10.75″W x 21.18″H | |
| Refrigerant | R-134a | R-134a | R-134a |
| HP | 0.35HP | 0.6HP | 0.7HP |
| Voltage Rating (15 amp dedicated circuit required) | 120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required) | 120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required) | 120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required) |
| Weight (lbs) | Evaporator:50 • Condenser:50 | Evaporator:90 • Condenser:60 | |
| Amps | Evaporator: 1 (running amps) Condenser: LRA 26/RLA 4.4 | Evaporator: 1 (running amps) Condenser: LRA 43/RLA 8 | |
| dBA (Evaporator) | 35 Evap /48 Cond | 48 Evap /45 Cond | 53 Evap /48 Cond |
| Line Set | Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.) | Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.) | |
| Drainline | 1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended | 1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended | |
| Installation | Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit. | ||
| Thermostat | Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable), 24V – customer supplied | ||
| Temp. Delta | Can maintain a 55°F cellar temperaturewith up to 120°F condenser air intake temperature | ||
| 24v Thermostat Conversion Kit | Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable), 24V – customer supplied | ||
Our Wall Mount unit has a beautiful exterior case so it can be mounted on the wall near the ceiling without a grill cover to hide the unit.
| Model | WM2500-S | WM3500-S | WM5000-S |
| Cellar Size | 500 | 1000 | 1750 |
| BTUh (w/85°F air entering the condenser coil) | 2078 / 2492 | 4244 / 4453 | 4577 / 4982 |
| CFM | 94 | 270 | |
| Dimensions | Evaporator: 13”L x 20”W x 10.5”H Condenser: 31.18″L x 10.75″W x 21.18″H | Evaporator: 16.1”L x 20.5”W x 15.5”H Condenser: 31.18″L x 10.75″W x 21.18″H | |
| Refrigerant | R-134a | R-134a | R-134a |
| HP | 0.35HP | 0.6HP | 0.7HP |
| Voltage Rating | Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required) | Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required) | |
| Weight (lbs) | Evaporator: 50 • Condenser: 50 | Evaporator: 60 • Condenser: 60 | Evaporator: 60 • Condenser: 60 |
| Amps | Evaporator: 0.97 (Running Amps) Condenser: LRA 5.3A, RLA 1.55A, FLA 1.7A | Evaporator: 2.2 (Running Amps), Compressor:LRA 10.7, RLA 2.7, FLA 3.1 | Evaporator: 2.2 (Running Amps) Compressor: LRA 13.2, RLA 3.19, FLA 3.66 |
| dBA (Evaporator) | 51/65 | 55/65 | 56/65 |
| Line Set | Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.) | Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.) | Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.) |
| Drainline | 1/2″ ID clear plastic tubing (not provided) | ||
| Installation | Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit. | ||
| Thermostat | Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (retractable cable), 24V – customer supplied | ||
| Temp. Delta | Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature | ||
| 24v Thermostat Conversion Kit | Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional) | ||
The Fully Ducted coils are mounted outside the cellar so all that is seen inside the cellar is the air supply and return grills.
| Model | FD3500-S | FD5000-S |
| Cellar Size | 1000 | 1750 |
| BTUh (w/85°F air entering the condenser coil) | 4082 / 4277 | 4479 / 4879 |
| CFM | 200 | 200 |
| Dimensions | Evaporator: 16.1″L x 20.5″W x 15.5″H • Condenser: 31.18″L x 10.75″W x 21.18″H | |
| Refrigerant | R-134a | R-134a |
| HP | 0.6HP | 0.7HP |
| Voltage Rating | Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required) | Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required) |
| Weight (lbs) | Evaporator: 56 • Condenser: 55 | Evaporator: 56 • Condenser: 56 |
| Amps | Evaporator: 2.2 (running amps) • Condenser: LRA 10.7, RLA 2.7, FLA 3.1 | Evaporator: 2.2 (running amps) • Condenser: LRA 13.2, RLA 3.19, FLA 3.66 |
| dBA (Evaporator/Condenser) | 42 / 45 | 42 / 48 |
| Ducting | 8″ Supply • 10″ Return | |
| Line Set | Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.) | |
| Drainline | 1/2″ ID clear plastic tubing (not provided) | |
| Installation | Evaporator can be installed up to 25 duct feet away from cellar. Condensing unit can be installed up to 100 line feet from evaporator unit. | |
| Thermostat | Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable), 24V – customer supplied | |
| Temp. Delta | Can maintain a 55°F cellar temperaturewith up to 120°F condenser air intake temperature | |
| 24v Thermostat Conversion Kit | Thermostat Conversion Kit that allows you to connect your cooling unit to any after market 24v thermostat. (Optional) | |
Previously available only as an add-on at the time of purchase, CellarCool’s 24-volt thermostat conversion kit is now available as an aftermarket upgrade. Like CellarCool’s previous thermostat conversion kits, the all-new in-field 24V thermostat conversion kit allows you to utilize industry-leading thermostat technology in your wine cellar. Simply select a 24-volt thermostat of your choice, order our in-field conversion kit, and change out the standard thermostat on your CellarCool cooling unit. The conversion kit’s simple plug-and-play design makes it easy to install in minutes. Take advantage of the latest in smart thermostat technology from Nest, Ecobee, or Honeywell.* Set alarm notifications, monitor runtimes and energy usage, and monitor your cellar environment from any mobile device.
*24-volt thermostats not included with purchase of 24-volt thermostat conversion kit.
*24-volt thermostat must be placed inside wine cellar, preferably in a central location away from direct airflow.
