SPLIT SYSTEMS

Download TWIN CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

Quick Start Guides

EVAPORATOR
Part Number	S-CCMS18000-220-FD	S-CCMS24000-220-FD
Cellar Size	5000 cu. ft.*	7500 cu. ft.*
BTU/h (60°F condenser air intake	15513 / 18250	22893 / 26933
BTU/h (75°F condenser air intake	14582 / 17155	21977 / 25856
BTU/h (85°F condenser air intake	13806 / 16243	21519 / 25317
dBA	58	58
Dimensions	29.5”L x 30.9”W x 19.8”H
Refrigerant	R-134a
Voltage Rating	120V (15-amp dedicated circuit required)
Weight (lbs)	96
Amps	9.2 (Running Amps)
Drain Line	3/4” ID CPVC
Installation	Evaporator unit can be installed up to 25 duct feet away from the cellar.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
Warranty	Two-year limited warranty (parts and labor)
CONDENSER
Model	18000	24000
dBA	52	58
Dimensions	31.18″L x 10.75″W x 23.25″H	35.25″L x 12″W x 33.7″H
Condensing Unit HP	2HP	3HP
Voltage Rating	220V (15-amp dedicated circuit required)	220V (25-amp dedicated circuit required)
Weight (lbs)	116	171
Amps	LRA 37, RLA 6.5, FLA 7.56	LRA 46.6, RLA 11.39, FLA 13
Line Set	Liquid line 3/8” OD; Suction line 5/8” OD (less than 50 ft.), 3/4” (greater than 50 ft.)
Installation	Condensing unit can be installed up to 100 line feet from evaporator unit.
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature.
Warranty	Two-year limited warranty (parts and labor)

CEILING MOUNT SPLIT SERIES

Virtually invisible inside the cellar
Built-in condensate pump system
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
2-speed fan switch for precise airflow management
Easy-access design with all connections at the base
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Liquid-temperature-measuring bottle probe for precise control
E-coated evaporator coil for improved performance and extended system life
Hex mesh grille with built-in air filter to guard against harmful debris

Optional Accessories

Omni Condenser Ducting Kit
24V Thermostat Conversion Kit Omni
Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

110V OMNI Owner Manuals

110V Copeland Owner Manuals

Download 2500 (24V) Owner Manual

Download 3500/5000 (24V) Owner Manual

Download Addendum Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCCM2500-220-4 S-CCCM-OMNI2500	S-CCCM3500-220 S-CCCM-OMNI3500	S-CCCM5000-220 S-CCCM-OMNI5000
Cellar Size	500	1000	2000
BTUh (w/85°F air entering the condenser coil) Sensible / Total	2188/2640	4945 / 5351	5157 / 5544
CFM	107	321	321
Dimensions	Evaporator: 25.05” L x 11.34” W x 11.17” H Condenser: 31.18″L x 10.75″W x 21.18″H	Evaporator: 35.75”L x 14.5”W x 12.75”H Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a	R-134a
HP	0.35HP	0.6HP	0.7HP
Voltage Rating (15 amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator:50 • Condenser:50	Evaporator:90 • Condenser:60
Amps	Evaporator: 1 (running amps) Condenser: LRA 26/RLA 4.4	Evaporator: 1 (running amps) Condenser: LRA 43/RLA 8
dBA (Evaporator)	35 Evap /48 Cond	48 Evap /45 Cond	53 Evap /48 Cond
Line Set	Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended	1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable), 24V – customer supplied

TWIN CEILING MOUNT SPLIT SERIES

Virtually invisible inside the cellar
Built-in condensate pump system
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
2-speed fan switch for precise airflow management
Easy-access design with all connections at the base
Built to perform in ambient temperatures as low as -20°F
Liquid-temperature-measuring bottle probe for precise control
220V High-Efficiency (H.E.) condenser for powerful performance
E-coated evaporator coil for improved performance and extended system life
Hex mesh grille with built-in air filter to guard against harmful debris

Optional Accessories

24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Addendum Manual

Download (24V) Twin Owner Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

Download Twin CHARGE CHART

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

Part Number	S-CCCM9000-220 S-WKCM9000-000-CW3	S-CCCM12000-220
Cellar Size	3000	3500
BTUh (w/85°F air entering the condenser coil) Sensible/Total	8631 / 9183	10268 / 11306
CFM	Evaporator: 810
Dimensions	Evaporator: 35.75”L x 14.5”W x 12.75”H • Condenser: 31.18″L x 10.75″W x 23.25″H
Refrigerant	R-134a
HP	1HP	1.5HP
Voltage Rating	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (15 amp dedicated circuit required)	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (20 amp dedicated circuit required)
Weight (lbs)	Evaporator: 53 • Condenser: 48	Evaporator: 53 • Condenser: 52
Amps	Evaporator: Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps) Condenser: LRA 20, RLA 4.25, FLA 4.89	Evaporator: Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps) Condenser: LRA 23.6, RLA 5.76, FLA 6.6
Line Set	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)
Drainline	3/4” ID CPVC
Installation	Evaporator unit can be installed up to 25 duct feet away from the cellar. Condensing unit can be installed up to 100 feet.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Evap can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature. Cond can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature.
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

WALL MOUNT SPLIT SERIES

Designed for small to medium-scale wine cellars
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Wall-mounted evaporator eliminating the need for ducting
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

UV-C Lighting System
Omni Condenser Ducting Kit
24V Thermostat Conversion Kit
Omni Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

110V OMNI Owner Manuals

110V Copeland Owner Manuals

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCWM2500-220-2 S-CCWM-OMNI2500	S-CCWM3500-220 S-CCWM-OMNI3500	S-CCWM5000-220-3 S-CCWM-OMNI5000
Cellar Size	500	1000	1750
BTUh (w/85°F air entering the condenser coil)	2078 / 2492	4244 / 4453	4577 / 4982
CFM	94	270
Dimensions	Evaporator: 13”L x 20”W x 10.5”H Condenser: 31.18″L x 10.75″W x 21.18″H	Evaporator: 16.1”L x 20.5”W x 15.5”H Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a	R-134a
HP	0.35HP	0.6HP	0.7HP
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)		Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator: 50 • Condenser: 50	Evaporator: 60 • Condenser: 60	Evaporator: 60 • Condenser: 60
Amps	Evaporator: 0.97 (Running Amps) Condenser: LRA 5.3A, RLA 1.55A, FLA 1.7A	Evaporator: 2.2 (Running Amps), Compressor:LRA 10.7, RLA 2.7, FLA 3.1	Evaporator: 2.2 (Running Amps) Compressor: LRA 13.2, RLA 3.19, FLA 3.66
dBA (Evaporator)	51/65	55/65	56/65
Line Set	Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/2″ ID clear plastic tubing (not provided)
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

TWIN WALL MOUNT SPLIT SERIES

Designed for medium to large-scale wine cellars
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Built to perform in ambient temperatures as low as -20°F
Wall-mounted evaporators eliminating the need for ducting
220V High-Efficiency (H.E.) condenser for powerful performance
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

Twin UV-C Lighting System
24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Twin CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

Part Number	S-CCWM9000-115-5 S-CCWM9000-220	WM9000-24V
Cellar Size	Approx. 3000 (Each wine cellar is unique and has specific cooling requirements. Heat load calculations should always be performed prior to selecting a cooling unit.)
BTUh (w/85°F air entering the condenser coil)	7779 / 8054
CFM	200 (per unit)
Dimensions	Evaporator: 16.1″L x 20.5″W x 15.5″H (x2) • Condensing Unit: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporators: 54 (per unit) • Condensing Unit: 64
Amps	Evaporator: Primary 2.48 (Running Amps) ; Secondary (2.2 Running Amps), Compressor: LRA 20, RLA 4.25, FLA 4.89
Line Set	Liquid Line 3/8″OD; Suction Line 5/8″OD (lessthan 50 ft.), 3/4″ (greater than 50 ft.)
Drainline	1/2” ID clear plastic tubing (not included)
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

FULLY DUCTED SPLIT SERIES

Designed for small to medium-scale wine cellars
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Fully ducted split system designed for quiet, efficient operation
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

UV-C Lighting System
Omni Condenser Ducting Kit
24V Thermostat Conversion Kit
Omni Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

Download Owner Manual

110V OMNI Owner Manuals

Download Owner Manual

110V/220V Copeland Owner Manuals

Download Owner Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCFD3500-220 S-CCFD-OMNI3500	S-CCFD5000-220-3 S-CCFD-OMNI5000
Cellar Size	1000	1750
BTUh (w/85°F air entering the condenser coil)	4082 / 4277	4479 / 4879
CFM	200	200
Dimensions	Evaporator: 16.1″L x 20.5″W x 15.5″H • Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a
HP	0.6HP	0.7HP
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator: 56 • Condenser: 55	Evaporator: 56 • Condenser: 56
Amps	Evaporator: 2.2 (running amps) • Condenser: LRA 10.7, RLA 2.7, FLA 3.1	Evaporator: 2.2 (running amps) • Condenser: LRA 13.2, RLA 3.19, FLA 3.66
dBA (Evaporator/Condenser)	42 / 45	42 / 48
Ducting	8″ Supply • 10″ Return
Line Set	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/2″ ID clear plastic tubing (not provided)
Installation	Evaporator can be installed up to 25 duct feet away from cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after market 24v thermostat. (Optional)

TWIN FULLY DUCTED SPLIT SERIES

Designed for medium to large-scale wine cellars
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Built to perform in ambient temperatures as low as -20°F
Fully ducted split system designed for quiet, efficient operation
220V High-Efficiency (H.E.) condenser for powerful performance
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

Twin UV-C Lighting System
24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Twin CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides