ALL COOLING SYSTEMS

For previous model owner manuals, please contact us.

PRODUCT SHEETS

Product Sheet

Part Number	U-CC2200-115-OPT-4	U-CC3300-115-OPT-4	U-CC4400-115-OPT-4	U-CC8800-115-OPT
Cellar Size	300	650	1000	1500
BTUh (w/85°F air entering the condenser coil)	1453	2049	2253	4241
Dimensions	17.5”L x 14.25”W x 15.75”H			21.64”L x 14.25”W x 22.56”H
Refrigerant	R-134a	R-134a	R-134a	R-134a
HP	1/8	1/6	1/6+	1/2
Voltage Rating	115V (15 amp dedicated circuit required)			115V (20 amp dedicated circuit required)
Weight (lbs)	65			104
AMPS	3.2 (running amps)	3.7 (running amps)	4.7 (running amps)	10.9 (running amps)
Drainline	1/2” ID clear plastic tubing
Installation	Through-the-Wall, Partially Ducted
Thermostat	Advanced digital display, liquid-temperature-measuring bottle probe (retractable cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature
Ducting Options	Exhaust air can be ducted using the optional ducting kit

CX SERIES

Designed for small to medium-scale wine cellars
30°F temperature differential (55°F cellar with ≤ 85°F intake)
Digital controller conveniently located on the face of the unit
Mounting bracket designed to fit between standard wall studs
Dynamic airflow design for excellent circulation throughout the cellar
Built-in air sensor for accurate temperature and humidity monitoring
Direct replacement for Breezaire and Wine Mate through-the-wall units
Self-contained through-the-wall design with no HVAC-R technician required

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

Owner Manual

For previous model owner manuals, please contact us.

PRODUCT SHEETS

Product Sheet

Part Number	U-CCCX2200-115-FC U-CCCX2200-115-RC	U-CCCX3300-115-FC U-CCCX3300-115-RC	U-CCCX4400-115-FC U-CCCX4400-115-RC	CX8800 (PHASED OUT)
Cellar Size	300	650	1000	2000
BTUh (w/85°F air entering the condenser coil)	1453	2049	2962	4754
CFM	118	126	216	216
Dimensions	16.38”L x 14.25”W x 13.25”H	21.63”L x 14.25”W x 19.75”H		22.25”L x 16.25”W x 22”H
Refrigerant	R-134a	R-134a	R-134a	R-134a
HP	0.57	0.8	1.16	1.86
Voltage Rating (20 amp dedicated circuit required)	115V; 230V (subject to availablility)
Weight (lbs)	65	66	67	74
AMPS	4.5 (running amps)	4.9 (running amps)	9 (running amps)	10 (running amps)
dBA (Evaporator/Condenser)	63 / 63	63 / 64	63 / 64	68 / 68
Drainline	3/8” Condensate (rear location only)
Installation	Through-the-Wall, Partially Ducted
Thermostat	Advanced electronic control system
Temp. Delta	Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature

ULTIMATE SERIES

Designed for small to medium-scale wine cellars
Quiet operation with sound levels as low as 51 dB
Front display or remote KDT Plus controller (-R)
Ductable condenser exhaust for flexible installation
Variable-speed fans deliver efficient, adaptive airflow control
55°F temperature differential (55°F cellar with ≤ 110°F intake)
Mounting bracket designed to fit between standard wall studs
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life
Self-contained through-the-wall design with no HVAC-R technician required

Optional Accessories

Exterior Grille
Condenser Duct Kit
Evaporator Duct Kit (-R Only)
UV-C Lighting System
24V Thermostat Conversion Kit
Ultimate tiR Filters (recommended replacement every 3 months)

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

Owner Manuals

Download (24V Remote) Owner Manual

Download Remote Manual

For previous model owner manuals, please contact us.

PRODUCT SHEETS

Product Sheet

Download (Remote) Owner Manual

Part number	U-CCUL3300ti-115-2 U-CCUL3300tiR-115-2	U-CCUL4400ti-115-2 U-CCUL4400tiR-115-2	U-CC-UL8800ti-115 U-CC-UL8800tiR-115
Cellar Size	800	1250	2000
BTUh (w/85°F air entering the condenser coil)	3175	4126	6131
CFM	256	256	283
Dimensions	28”L x 14.25”W x 15.75”H		28”L x 14.25”W x 22.5”H
Refrigerant	R-134a	R-134a	R-134a
HP	1/4	1/3	1/3+
Voltage Rating (20 amp dedicated circuit required)	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)
Weight (lbs)	150	150	170
Amps	9 (running amps)	9 (running amps)	9 (running amps)
dBA (Low/Medium/High)	51 / 58 / 66	51 / 58 / 66	57 / 59 / 61
Drainline	1/2” ID clear plastic tubing (not provided)
Installation	Through-the-Wall, partially ducted, fully ducted
Thermostat	Advanced digital controller, liquid-temperature-measuring bottle probe (retractable cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature
Outside Venting	Can be done if the outside temperature does not exceed 110°F, the external grille cover is highly recommended.
Ducting Opetions	Condensing side can be ducted.

FULLY DUCTED ULTIMATE SERIES

Designed for small to medium-scale wine cellars
KDT digital controller/thermostat with 50-ft. Cable
Can be placed up to 25 ft. away for virtually silent operation
Variable-speed fans deliver efficient, adaptive airflow control
Liquid-temperature-measuring bottle probe for precise control
Dependable operation in extreme conditions with 55°F differential
E-coated evaporator coil for improved performance and extended system life
Fully ducted design keeps unit hidden and maximizes cellar aesthetics

Optional Accessories

Ducting Plenum
24V Thermostat Conversion Kit
Ultimate tiR Filters (recommended replacement every 3 months)

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

Owner Manuals

Download Remote (24V) Manual

For previous model owner manuals, please contact us.

PRODUCT SHEETS

Product Sheet

Part Number	U-CCUL3300FD-115-2	U-CCUL4400FD-115-2	U-CC-UL8800TIRFD-115
Cellar Size	800	1250	2000
BTUh(w/85°F air entering the condenser coil)	2688	3794	5760
CFM	256	256	333
Dimensions	39.5″L x 14.25″W x 22.5″H (with duct plenums)		39.5″L x 14.25″W x 26″H (with duct plenums)
Refrigerant	R-134a	R-134a	R-134a
HP	1/4	1/3	1/3+
Voltage Rating	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)
Weight (lbs)	150	150	187
Amps	9 (running amps)	9 (running amps)	10 (running amps)
Duct Size	8” Supply • 8” Return(evaporator and condenser)		8” Supply • 10” Return (evaporator and condenser)
Drainline	1/2” ID clear plastic tubing (not provided)
Installation	Can be installed up to 25 duct feet away from cellar.
Thermostat	Advanced digital display (50ft. cable), liquid-temperature-measuring bottle probe (50ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature
Outside Venting	Can be done if the outside temperature does not exceed 110°F, the external grille cover is highly recommended.

ULTIMATE PLUS FULLY DUCTED SERIES

Designed for small to medium-scale wine cellars
KDT digital controller/thermostat with 50-ft. Cable
Supply and exhaust plenums included for easy installation
Can be placed up to 25 ft. away for virtually silent operation
Multi-directional blowers allow versatile duct configurations
Stainless steel drip tray for durability and easy maintenance
55°F temperature differential (55°F cellar with ≤ 110°F intake)
Liquid-temperature-measuring bottle probe for precise control
E-coated evaporator coil for improved performance and extended system life
Fully ducted design keeps unit hidden and maximizes cellar aesthetics

Optional Accessories

UV-C Lighting System
24V Thermostat Conversion Kit

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

Owner Manuals

Download (24V) Owner Manual

For previous model owner manuals, please contact us.

PRODUCT SHEETS

Product Sheet

Part Number	U-CCUL3300-115-PF-3	U-CCUL4400-115-PFD2	U-CCUL8800-115-PFD2
Cellar Size	800	1250	2000
BTUh (w/85°F air entering the condenser coil)	4060	5521	6025
CFM	326 with blowers in top orientation; 312 with blowers in side orientation		340 with blowers in top orientation; 335 with blowers in side orientation
Dimensions	37″L x 15.75″H x 15.75″W (without duct plenums); 48″L x 22.75″H x 15.75″W (duct plenums on top of unit); 15.75″H x 22.75″W (duct plenums on side of unit)
Refrigerant	R-134a	R-134a	R-134a
HP	1/4	1/3	1/3+
Voltage Rating (20 amp dedicated circuit required)	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)	115V (20 amp dedicated circuit required); 230V (subject to availability)
Weight (lbs)	115	115	115
Amps	9 (running amps)	9 (running amps)	9 (running amps)
Duct Size	8″ supply • 10″ return (evaporator and condenser)
Drainline	1/2” ID clear plastic tubing (10 feet provided)
Installation	Can be installed up to 25 duct feet away from cellar.
Thermostat	Advanced digital display (50ft. cable), liquid-temperature-measuring bottle probe (50ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature

MAGNUM FULLY DUCTED SPLIT SERIES

New sleek black metal kit with a durable finish
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
3-speed fan switch for precise airflow management
Built to perform in ambient temperatures as low as -20°F
Stainless steel drip tray for durability and easy maintenance
Quiet, efficient operation for a peaceful cellar environment
Fully ducted split system designed for large-scale wine cellars
220V High-Efficiency (H.E.) condenser for powerful performance
Interchangeable evaporator airflow panels for installation flexibility
Liquid-temperature-measuring bottle probe for precise control

Optional Accessories

UV-C Lighting System
24V Thermostat Conversion Kit

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

Download Tech Manual

220V (Copeland) Owner Manuals

Download (24V) Owner Manual

Download Tech Manual

Download (24V) Tech Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

Charge Charts

Download 9000/12000 CHARGE CHART

PRODUCT SHEETS

220V H.E. Product Sheet

220V (Copeland) Product Sheet

Download 9000/12000 QUICK START GUIDE

QUICK START GUIDES

Quick Start Guides

Part Number	S-CCMS9000	S-CCMS12000
Cellar Size	3000	4000
BTUh (w/85°F air entering the condenser coil) Sensible/Total	10145 / 10786	11704 / 13844
CFM	Evaporator: 810
Dimensions	Evaporator: 29.5”L x 30.9”W x 19.8”H • Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a
HP	3/4	1 1/4
Voltage Rating	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (15 amp dedicated circuit required)	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (20 amp dedicated circuit required)
Weight (lbs)	Evaporator: 96 • Condenser: 64	Evaporator: 96 • Condenser: 84
Amps	Evaporator: 9.2 (Running Amps) Condenser: LRA 20, RLA 4.25, FLA 4.89	Evaporator: 3.2 (running amps) Condenser: LRA 23.6, RLA 5.76, FLA 6.6
Line Set	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)
Drainline	3/4” ID CPVC
Installation	Evaporator unit can be installed up to 25 duct feet away from the cellar. Condensing unit can be installed up to 100 feet.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Evap can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature. Cond can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature.
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after market 24v thermostat. (Optional)

MAGNUM FULLY DUCTED TWIN SPLIT SERIES

New sleek black metal kit with a durable finish
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
3-speed fan switch for precise airflow management
Built to perform in ambient temperatures as low as -20°F
Stainless steel drip tray for durability and easy maintenance
Quiet, efficient operation for a peaceful cellar environment
Fully ducted split system designed for large-scale wine cellars
220V High-Efficiency (H.E.) condenser for powerful performance
Interchangeable evaporator airflow panels for installation flexibility
Liquid-temperature-measuring bottle probe for precise control

Optional Accessories

Twin UV-C Lighting System
24V Thermostat Conversion Kit

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

Download Tech Manual

Download TWIN CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

Quick Start Guides

EVAPORATOR
Part Number	S-CCMS18000	S-CCMS24000
Cellar Size	5000 cu. ft.*	7500 cu. ft.*
BTU/h (60°F condenser air intake	15513 / 18250	22893 / 26933
BTU/h (75°F condenser air intake	14582 / 17155	21977 / 25856
BTU/h (85°F condenser air intake	13806 / 16243	21519 / 25317
dBA	58	58
Dimensions	29.5”L x 30.9”W x 19.8”H
Refrigerant	R-134a
Voltage Rating	120V (15-amp dedicated circuit required)
Weight (lbs)	96
Amps	9.2 (Running Amps)
Drain Line	3/4” ID CPVC
Installation	Evaporator unit can be installed up to 25 duct feet away from the cellar.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
Warranty	Two-year limited warranty (parts and labor)
CONDENSER
Model	18000	24000
dBA	52	58
Dimensions	31.18″L x 10.75″W x 23.25″H	35.25″L x 12″W x 33.7″H
Condensing Unit HP	2HP	3HP
Voltage Rating	220V (15-amp dedicated circuit required)	220V (25-amp dedicated circuit required)
Weight (lbs)	116	171
Amps	LRA 37, RLA 6.5, FLA 7.56	LRA 46.6, RLA 11.39, FLA 13
Line Set	Liquid line 3/8” OD; Suction line 5/8” OD (less than 50 ft.), 3/4” (greater than 50 ft.)
Installation	Condensing unit can be installed up to 100 line feet from evaporator unit.
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature.
Warranty	Two-year limited warranty (parts and labor)

CEILING MOUNT (CM) SPLIT SERIES

Virtually invisible inside the cellar
Built-in condensate pump system
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
2-speed fan switch for precise airflow management
Easy-access design with all connections at the base
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Liquid-temperature-measuring bottle probe for precise control
E-coated evaporator coil for improved performance and extended system life
Hex mesh grille with built-in air filter to guard against harmful debris

Optional Accessories

Omni Condenser Ducting Kit
24V Thermostat Conversion Kit
Omni Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

110V OMNI Owner Manuals

110V Copeland Owner Manuals

Download 2500 (24V) Owner Manual

Download 3500/5000 (24V) Owner Manual

Download Addendum Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCCM2500-220-4 S-CCCM-OMNI2500	S-CCCM3500-220 S-CCCM-OMNI3500	S-CCCM5000-220 S-CCCM-OMNI5000
Cellar Size	500	1000	2000
BTUh (w/85°F air entering the condenser coil) Sensible / Total	2188/2640	4945 / 5351	5157 / 5544
CFM	107	321	321
Dimensions	Evaporator: 25.05” L x 11.34” W x 11.17” H Condenser: 31.18″L x 10.75″W x 21.18″H	Evaporator: 35.75”L x 14.5”W x 12.75”H Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a	R-134a
HP	0.35HP	0.6HP	0.7HP
Voltage Rating (15 amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)	120V (15-amp dedicated circuit required), 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator:50 • Condenser:50	Evaporator:90 • Condenser:60
Amps	Evaporator: 1 (running amps) Condenser: LRA 26/RLA 4.4	Evaporator: 1 (running amps) Condenser: LRA 43/RLA 8
dBA (Evaporator)	35 Evap /48 Cond	48 Evap /45 Cond	53 Evap /48 Cond
Line Set	Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended	1/4″ ID clear plastic tubing (not provided)- Rigid tube recommended
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable), 24V – customer supplied

CEILING MOUNT (CM) TWIN SPLIT SERIES

Virtually invisible inside the cellar
Built-in condensate pump system
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. cable
2-speed fan switch for precise airflow management
Easy-access design with all connections at the base
Built to perform in ambient temperatures as low as -20°F
Liquid-temperature-measuring bottle probe for precise control
220V High-Efficiency (H.E.) condenser for powerful performance
E-coated evaporator coil for improved performance and extended system life
Hex mesh grille with built-in air filter to guard against harmful debris

Optional Accessories

24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Addendum Manual

Download (24V) Twin Owner Manual

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

Download Twin CHARGE CHART

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

Part Number	S-CCCM9000-220 S-WKCM9000-000-CW3	S-CCCM12000-220
Cellar Size	3000	3500
BTUh (w/85°F air entering the condenser coil) Sensible/Total	8631 / 9183	10268 / 11306
CFM	Evaporator: 810
Dimensions	Evaporator: 35.75”L x 14.5”W x 12.75”H • Condenser: 31.18″L x 10.75″W x 23.25″H
Refrigerant	R-134a
HP	1HP	1.5HP
Voltage Rating	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (15 amp dedicated circuit required)	Evaporator: 120V (15-amp dedicated circuit required) Condenser: 220V (20 amp dedicated circuit required)
Weight (lbs)	Evaporator: 53 • Condenser: 48	Evaporator: 53 • Condenser: 52
Amps	Evaporator: Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps) Condenser: LRA 20, RLA 4.25, FLA 4.89	Evaporator: Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps) Condenser: LRA 23.6, RLA 5.76, FLA 6.6
Line Set	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)	Liquid line 3/8” OD; Suction line 5/8” OD (lessthan 50 ft.), 3/4” (greater than 50 ft.)
Drainline	3/4” ID CPVC
Installation	Evaporator unit can be installed up to 25 duct feet away from the cellar. Condensing unit can be installed up to 100 feet.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Evap can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature. Cond can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature.
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

WALL MOUNT (WM) SPLIT SERIES

Designed for small to medium-scale wine cellars
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Wall-mounted evaporator eliminating the need for ducting
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

UV-C Lighting System
Omni Condenser Ducting Kit
24V Thermostat Conversion Kit
Omni Exterior Condenser Housin

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

110V OMNI Owner Manuals

110V Copeland Owner Manuals

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCWM2500-220-2 S-CCWM-OMNI2500	S-CCWM3500-220 S-CCWM-OMNI3500	S-CCWM5000-220-3 S-CCWM-OMNI5000
Cellar Size	500	1000	1750
BTUh (w/85°F air entering the condenser coil)	2078 / 2492	4244 / 4453	4577 / 4982
CFM	94	270
Dimensions	Evaporator: 13”L x 20”W x 10.5”H Condenser: 31.18″L x 10.75″W x 21.18″H	Evaporator: 16.1”L x 20.5”W x 15.5”H Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a	R-134a
HP	0.35HP	0.6HP	0.7HP
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)		Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator: 50 • Condenser: 50	Evaporator: 60 • Condenser: 60	Evaporator: 60 • Condenser: 60
Amps	Evaporator: 0.97 (Running Amps) Condenser: LRA 5.3A, RLA 1.55A, FLA 1.7A	Evaporator: 2.2 (Running Amps), Compressor:LRA 10.7, RLA 2.7, FLA 3.1	Evaporator: 2.2 (Running Amps) Compressor: LRA 13.2, RLA 3.19, FLA 3.66
dBA (Evaporator)	51/65	55/65	56/65
Line Set	Liquid line 1/4” OD; Suction line 3/8” OD (lessthan 50 ft.), 1/2” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/2″ ID clear plastic tubing (not provided)
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

WALL MOUNT (WM) TWIN SPLIT

Designed for medium to large-scale wine cellars
Efficient airflow circulation for consistent cooling
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Built to perform in ambient temperatures as low as -20°F
Wall-mounted evaporators eliminating the need for ducting
220V High-Efficiency (H.E.) condenser for powerful performance
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

Twin UV-C Lighting System
24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Twin CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

Part Number	S-CCWM9000-115-5 S-CCWM9000-220	WM9000-24V
Cellar Size	Approx. 3000 (Each wine cellar is unique and has specific cooling requirements. Heat load calculations should always be performed prior to selecting a cooling unit.)
BTUh (w/85°F air entering the condenser coil)	7779 / 8054
CFM	200 (per unit)
Dimensions	Evaporator: 16.1″L x 20.5″W x 15.5″H (x2) • Condensing Unit: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporators: 54 (per unit) • Condensing Unit: 64
Amps	Evaporator: Primary 2.48 (Running Amps) ; Secondary (2.2 Running Amps), Compressor: LRA 20, RLA 4.25, FLA 4.89
Line Set	Liquid Line 3/8″OD; Suction Line 5/8″OD (lessthan 50 ft.), 3/4″ (greater than 50 ft.)
Drainline	1/2” ID clear plastic tubing (not included)
Installation	Evaporator is installed in the cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after-market 24v thermostat. (Optional)

FULLY DUCTED (FD) SPLIT SERIES

Designed for small to medium-scale wine cellars
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Available with either 110V or 220V condenser options
Built to perform in ambient temperatures as low as -20°F
Fully ducted split system designed for quiet, efficient operation
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

UV-C Lighting System
Omni Condenser Ducting Kit
24V Thermostat Conversion Kit
Omni Exterior Condenser Housing

The Fully Ducted coils are mounted outside the cellar so all that is seen inside the cellar is the air supply and return grills.

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

110V OMNI Owner Manuals

110V/220V Copeland Owner Manuals

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

110V Omni Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V OMNI Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

110V Omni Quick Start Guides

Part Number	S-CCFD3500-220 S-CCFD-OMNI3500	S-CCFD5000-220-3 S-CCFD-OMNI5000
Cellar Size	1000	1750
BTUh (w/85°F air entering the condenser coil)	4082 / 4277	4479 / 4879
CFM	200	200
Dimensions	Evaporator: 16.1″L x 20.5″W x 15.5″H • Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a	R-134a
HP	0.6HP	0.7HP
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15-amp dedicated circuit required)
Weight (lbs)	Evaporator: 56 • Condenser: 55	Evaporator: 56 • Condenser: 56
Amps	Evaporator: 2.2 (running amps) • Condenser: LRA 10.7, RLA 2.7, FLA 3.1	Evaporator: 2.2 (running amps) • Condenser: LRA 13.2, RLA 3.19, FLA 3.66
dBA (Evaporator/Condenser)	42 / 45	42 / 48
Ducting	8″ Supply • 10″ Return
Line Set	Liquid line 1/4” OD; Suction line 1/2” OD (lessthan 50 ft.), 5/8” (greater than 50 ft.)
Drainline	1/2″ ID clear plastic tubing (not provided)
Installation	Evaporator can be installed up to 25 duct feet away from cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after market 24v thermostat. (Optional)

FULLY DUCTED (FD) TWIN SPLIT SERIES

Designed for medium to large-scale wine cellars
Flare fittings allow quick, brazing-free installation
KDT digital controller/thermostat with 50-ft. Cable
Built to perform in ambient temperatures as low as -20°F
Fully ducted split system designed for quiet, efficient operation
220V High-Efficiency (H.E.) condenser for powerful performance
Liquid-temperature-measuring bottle probe for precision control
E-coated evaporator coil for improved performance and extended system life

Optional Accessories

Twin UV-C Lighting System
24V Thermostat Conversion Kit
Large Exterior Condenser Housing

California Residents: PROPOSITION 65 WARNING

OWNER MANUALS

220V H.E. Owner Manuals

220V Copeland Owner Manuals

Download Twin CHARGE CHART

For previous model owner manuals, please contact us.

CHARGE CHARTS

220V H.E. Charge Charts

PRODUCT SHEETS

220V H.E. Product Sheet

110V/220V Copeland Product Sheet

QUICK START GUIDES

220V H.E. Quick Start Guides

DOWNLOAD INSTALLATION GUIDE

Part Number	S-CCFD9000-115-5 S-CCFD9000-220	FD9000-24V
Cellar Size	Approx. 3000 (Each wine cellar is unique and has specific cooling requirements. Heat load calculations should always be performed prior to selecting a cooling unit.)
BTUh (w/85°F air entering the condenser coil)	7281 / 7879
CFM	200 (per unit)
Dimensions	Evaporator: 16.1″L x 20.5″W x 15.5″H (x2) • Condenser: 31.18″L x 10.75″W x 21.18″H
Refrigerant	R-134a
Voltage Rating	Evaporator: 115V (15 amp dedicated circuit required) Condenser: 220V (15 amp dedicated circuit required)
Weight (lbs)	Evaporators: 56 (per unit) • Condensing Unit: 64
Amps	Evaporator: Primary 2.48 (Running Amps) ; Secondary (2.2 Running Amps) • Condenser: LRA 50/RLA 9.3
Duct Size	8″ Supply (x2) • 10″ Return (x2)
Drainline	1/2″ ID clear plastic tubing (not included)
Installation	Evaporator can be installed installed up to 25 duct feet away from cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.
Thermostat	Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)
Temp. Delta	Can maintain a 55°F cellar temperature with up to 120°F condenser air intake temperature
24v Thermostat Conversion Kit	Thermostat Conversion Kit that allows you to connect your cooling unit to any after market 24v thermostat. (Optional)

24V THERMOSTAT CONVERSION KIT

Plug-and-play design allows fast, simple installation
Track runtimes and energy usage for improved efficiency
Monitor cellar temperature remotely from any mobile device
Now offered as an aftermarket upgrade, not just at purchase
Converts standard controller to a 24V thermostat of your choice
Set custom alerts for temperature changes and system performance
Compatible with Nest, Ecobee, Honeywell, and other smart thermostats

*24-volt thermostats not included with purchase of 24-volt thermostat conversion kit.

*24-volt thermostat must be placed inside wine cellar, preferably in a central location away from direct airflow.

INSTALLATION GUIDE

PRODUCT SHEETS

Download Installation Guide

UV-C LIGHTING SYSTEM

Prevents mold growth within the system
Reduces air-borne pathogens and allergen levels
Reduces unpleasant smells within the cellar
Maintains an overall healthier cellar environment.
Available on Ultimate PLus, Optimum, & Fully-Ducted/Wall-Mount Systems

Ultraviolet Germicidal Irradiation (UVGI) is a disinfection method that uses short-wavelength ultraviolet (UV-C) light to kill microorganisms such as fungus, mold, mildew, and bacteria. The application of UV-C light to disinfect has been an accepted practice since the 1950s and is used in a variety of applications such as food, air, and water purification.

INSTALLATION GUIDE

PRODUCT SHEETS

OPTIMUM DUCT KITS

Integrated heat sensor for safe, efficient operation
Simple installation with all necessary components included
Relocates unwanted heat from the exhaust side of Optimum units
Improves cellar environment by venting heat to an alternate location
Includes duct plenum, transitions, in-line fan, and adjustable elbow for complete setup

Small Ducting Kit

Compatible with Optimum 2200, 3300, 4400

Large Ducting Kit

Compatible with Optimum 8800

PRODUCT SHEETS

OPTIMUM EXTERIOR GRILLE

Sleek, low-profile design for a clean exterior finish
Ensures long-term durability and system protection
Shields exhaust side of unit from outdoor weather elements
Compatible with Optimum 2200, 3300, 4400, and 8800 models

PRODUCT SHEETS

ULTIMATE EXTERIOR GRILLE

Designed for seamless fit with Ultimate Series units
Durable construction for long-lasting exterior protection
Compatible with ducted Ultimate 3300, 4400, and 8800 models
Improves reliability and performance in exterior wall installations
Shields the exhaust side of the system from outdoor weather elements

PRODUCT SHEETS

ULTIMATE DUCT PLENUMS

Durable construction ensures long-term performance
Compatible with Ultimate 3300, 4400, and 8800 models
Expands installation options for tighter or unique spaces
Direct cold air into the cellar or vent hot exhaust air outside
Allows ducting on either side of the unit for maximum flexibility

PRODUCT SHEETS

ULTIMATE FILTERS

Help extend the life of your cooling unit
Improve air quality and system efficiency
Recommended replacement every 3 months
Easy-to-install replacement filters for Ultimate systems
Compatible with ducted Ultimate 3300, 4400, and 8800 models
3300/4400 Dimensions: 11 ¾” x 9″ x 1″
8800 Dimensions: 11 ¾” x 13 ½” x 1″

PRODUCT SHEETS

CONDENSATE PUMP

½-gallon leakproof, rustproof ABS tank
Stainless steel shaft with snap-action switch
Quick, easy installation with compact design
Pumps excess condensate up to 20 ft. away
Fully automatic operation with 3 drain holes
Thermal overload protection for motor safety
Suitable for high-efficiency and gas-furnace condensate
ABS tank cover and polypropylene impeller for durability
Removable ⅜″ barbed check valve for easy maintenance

PRODUCT SHEETS